Release date: 19.09.2019

Nouvelles fonctionnalités

• 115 – Add Services when BOM is hidden – From now on, as a Dealer you can add services on a project even if you cannot see the BOM, so the quote reflects all the products and services you provide. Therefore, we have added a new tab page at project level and at component level.
• 118 – Raw Profiles Details Report – We have added a new report called “Raw Profiles Details” that shows all the raw profiles including their H, W and length, and the semifinished profile with its length. The information appears only if a semifinished profile exists.

Erreures corrigés

• 119 – The filter from glass selection form is not working properly – The filter from glass selection form did not work properly. We have improved the filter mechanism, so you can filter the glass much easier.
• 120 – Information about secondary material species appears on the reports – The information about secondary material species appeared on the reports, even if we don’t have set this information in the database.

Release date: 26.08.2019

Nouvelles fonctionnalités

• 66 – Welding CNC Rotox SMK – From now on, as a production you have the ability to export file using Rotox Communication Protocol for Welders, so that you can use a Rotox SMK in automatic mode.

Améliorations

• 93 – Add Component Accessory Filter on the Processing Operation Form – We have added a new filter, “Component Accessory” on the Processing Operation Form. This filter will help you filter the processing operations by component operations.
• 106 – CNC Soukup Arcus – Add first and second tenoning – From now on, you can set First, Second and End Tenoning for each Raw separately from the new tab “Tenoning Operations” from CNC Options form.
• 107 – Contact list – user rights – From now on, with the new user right “Access all contacts” the user can see only the contacts added by him when a project is created.
• 108 – Save as – modify “created by” user – From now on, when an user opens a project that was created by another user, and clicks “save as”, the value of “created by” will become the current user.

Release date: 05.08.2019

Nouvelles fonctionnalités

• 66 – Welding CNC Rotox SMK – From now on, as a production you have the ability to export file using Rotox Communication Protocol for Welders, so that you can use a Rotox SMK in automatic mode.

Améliorations

• 71 – Glass price calculate by Lite Count of Georgian bars – We have added a new function template into Fittings and Accessories rules which allows you to calculate the price of glass by Lite Count of Georgian Bars. The rule template is: Use “accessory” on “fixed” by formula “quantity = a*n+b”, where n = lite number.
• 81 – Add tolerance between arc segments – As a wood production, you are now able to set tolerance between arc segments. To set this tolerance, you need to go on the raw profile, and at “tolerance” tab set “welding tolerance”.

Fixed bugs

• 80 – Soukup Arcus export raw shape points – We have made some changes at Soukup Arcus Processing CNC.
• 103 – The X button from Glass Tolerance column is missing –The X button from Glass Tolerance column from Profiles form was missing.

Release date: 08.07.2019

Améliorations

• 70 – Add tolerance between arc segments –From now on, you are able to set tolerance between arc segments.

Fixed bugs

• 69 – The compound profiles don’t export into the Arc Panel Report – The compound profiles do not export into the Arc Panel Report, even if the profile had set “curving mode” as “milling”, and in Arc Panel Report, the “only milled arcs” option is checked.
• 86 – The Raw Profile is not generated in the BOM – The Raw Profile is not generated in the BOM if material type is not defined in the database.

Release date: 25.06.2019

Nouvelles fonctionnalités

• 60 – Secondary Material Species – From now on, you have the ability to use two material species on wood windows. A wood window can be made from two different wood species. There can be several reasons for this: Price, one type of wood is not suitable for exterior, or even aesthetic. Sometimes, the components of a compound profile can be made from different species

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

• 65 – Cannot export hardware system – The user cannot export a hardware system, due to an error about rules that use Window Technical Parameter.
• 35 – Unable to resize the profile system look-up – The user was unable to resize the Profile System look-up from profile edit form.

Release date: 31.05.2019

Améliorations

• 28 – Add new option to Hollinger MSE welding CNC – We have added new option to this CNC. The new option allows to rotate the component if dimension is not into the interval. To define this interval, we have added 4 options (X min, X max, Y min, Y max). The second option let you to choose if you want to rotate or not, and the last options let you to choose if you want to export the profiles that do not match.
• 29 – Add limit for secondary text and main text – We have added an option into the application, where you can set a limit of the data (1Mb) for secondary text and main text (.rtf). Now, if you add a big image (e.g. 8 Mb), the image will be saved on each project from database what will lead to a very large database. If you want to add a big image, you can modify the value from Project Options from Tools-> Options -> Other -> Project -> Maximum text file (KB). Be careful, you must set the image size in KB, and the image must be in .png format because if the format is .jpeg, the ra will convert the image in .png format, and the image will be bigger than the actual image.
• 55 – CNC Soukup Arcus modifications – We have made some modifications at CNC Soukup Arcus as follow: Origin point from options is deleted, the translations are now formed of X coordinate of the first point from the arch and Y coordinate of the bulge point of the arch. If we have Arch with panel, if compensation profiles left and right are not the same as the top one, prof 2 will be empty.
• 58 – Bulgarian language changes – We made some changes, re-translating some words in Bulgarian.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

• 46 – Wrong information about costs in Project Analysis report –If I create a project with main text and extra cost and I save the project into the database, then I change the Project Phase from Project Management, the Text and Extra cost disappear from project.
• 47 – The “typed values” is incomplete on an old project – When an old project was loaded, on field “values” from property grid, you were not able to see the all “typed values” when “Computing Mode” was changed to “Surface Unit Price”. Now, if you have dealer on project level, for every computing mode you’ll get only the supported groups (shutters, prefabricated insect screen and glass).
• 44 – Load Button doesn’t load older backups – If I want to load an older export file (.rad) that doesn’t have one tab (e.g. technical parameters), the application brings an error and doesn’t load the data from .rad.
• 52 – Esc button not working on forms Now, you can close any form with Esc.

ral.

Release date: 07.05.2019

New feature

• 14 – Design Sheet Customization – From now on, we have capacity of changing the look of the design sheet. In the left panel we are able to alter: Category designation, Category visibility, Command Designation, Command Visibility.

Améliorations

• 17 – New Command – Design Sheet – We have added 4 new command in Design Sheet: Sliding 3 Sash, Sliding 4 Sash, Sliding 3 Door Panel, Sliding 4 Door Panel.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

• 31 – Profile system not visible while using only active – If you are using only active button and want to add a new profile system on a profile edit form, the added profile system does not appear in the look up. Also, if you want to add it again, a message appears.
• 30 – Text and Extra cost is missing from saved project – If I create a project with main text and extra cost and I save the project into the database, then I change the Project Phase from Project Management, the Text and Extra cost disappear from project.
• 39 – We have made some revision at translated words in es-ES.
• 41 – Color Combination Code for CNC Graf CLF – If I have a neutral double laminated, neutral inner laminated or neutral outer laminated profile, this CNC exports WH instead of color combination code. The color should be WH only when the color combination type is Neutral.

Release date: 02.04.2019

Améliorations

• 5 – Add double cutting on Rotox CNC LA 396PC – We have added an option on this CNC called “use optimization” that help you to export double cutting on Rotox LA 396 PC cutting machine.
• 6 – Add load button on material export – We have added a new button into material export option. From now on, you can load an old export file into material export and the options will fill in automatically.
• 10 – Changes at CNC Graf Synergy – Welding – We have added new values for color combination types in export file, WH – white, C – laminated, P – coated.
• 12 – Add glass category in profile system edit – From now on, you can set glass category on a profile system, so you can use only that glass in a project when you make a component that use that profile system.
• 13 – Changes at Processing CNC Graf Synergy – We have added new parameters that appears in export file.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

• 2 – Processing operation edit form – some information does not save after edit – the information was not saved when we changed the values of “processing length”, “tool radius” or “offset”.
• 3 – Dead Lock Error -Ra Workshop Client – During deletion of many components the other connected clients cannot save projects to the database.
• 4 – Cover wings – default value after reset profile type – Each profile has a default value for cover wings. When we changed the profile type of an existing item, the cover wings value does not reset to default.
• 11 – Bar code not match on Graf Synergy CNC – The bar-code from export file was not well generate, and did not match with the bar-code from label file export.
• 22 – Processing CNC options does not correctly serialize – CNC options for Thorversten PBZ does not correctly serialize. In 15.3 version the bar-code type was: “Project Code; Wing Index; Segment Index”, and after update the bar-code type: “Project Code; Wing Code; Segment Index”, so I don’t have identical bar code in cnc file export.
• 24 – Format insect screen info option is not saved after reopening the application – The format insect screen info option does not save after reopening the application.
• 26 – Prefabricated Insect screen missing from Client Quote – After added the option “Format insect screen info” in Report Options, the prefabricated insect screen missing from Client Quote.

Release date: 28.02.2019

Améliorations

• 8103 – Add extending mode on profiles that comes in BOM from rules – We have added the “extending mode” property for profiles that comes in BOM from rules. You can now optimize this profile if the segment length is longer than bar length.
• 8120 – Opening type – reports – We have added a new option to graphic reports called “Show opening type”. You can view now in reports what kind of opening type is the window.
• 8122 – Glass panel report – viewing mode – From now on, the glass panel report comes with information about viewing mode. As default, viewing mode is from inside. For outside view you must to check “show opening type” from report option.
• 8136 – Options for CNC Murat SC220/40 – Modified The option File version not exists anymore. We have added an option called “Data Field Count” and you can choose the number of data information. If the file version was 1 before, now you have 4 data filed, and if the file version was 2 before, now you have 2 data field.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

• 7975 – Urban DGU 600 cutting conflict – We have modified the barcode of component, so if you have a component with multiple quantity, no conflict exists anymore.
• 8134 – Object reference not set an instance of an object – The Uw Analysis Report did not work when the component had no glass.
• 8138 – Exposed property – When select the quote on the drawing, in property grid a property appeared that should not be exposed.
• 8139 – Container counting – Container counting was not correct in cutting optimization report.

Release date: 18.02.2019

Améliorations

• 8130 – Mark inactive reinforcement on reinforcement tab from profile edit form – Now, you can view if a reinforcement is used on a profile and is inactive when you look in profile edit form
• 8131 – Add new row – CNC Operation form – From now on, the “add new row” is on the top of the data grid.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

• 8128 –Text disappear when focus is on textbox – In import form at tab “special” when you want to copy the information from manufactured and branch textbox, when you focus on them, the information disappears and you can’t copy them.

Release date: 12.02.2019

Améliorations

• 8063 – Threshold tolerance – From now on exists a new type of tolerance in defining of a profile, called “no threshold tolerance”.
• 8078 – New info on profile cutting labels – From now on, you have some extra info fields to print on the profile cutting labels report: “Hardware system”, “reinforcement name and length”. Also, you can now add picture of the component with segment in black color. To do this you must go to Report Options of Profile cutting labels and check “Show imakes with selection” and in “segment text” tab, you can edit labels to add this info to print.
• 8115 – Add header on color combination filter – From now on, the color combination list from color combination filter look-up is alphabetically ordered, so it is easier to search them.
• 8135 – Add Bahraini Dinar (BHD) – We have added a new currency – Bahraini Dinar.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

• 8119 – Ra Workshop Server – Check for updates and check for updates data wrong message – When the user clicks on “check for updates” and no update was available, no message appears, and when the user clicks on “check for updates data”.

Release date: 29.01.2019

Améliorations

• 7899 – Print services on the Report – From now on you have an option on the order confirmation report called “show services”. This option will print you the services on the report footer.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to mage sure the issues were resolved successfully.

• 8118 – Ra Workshop Server – Shrink database message – The option to Shrink Database was ending with an incoherent message. The message wasn’t complete translated in English.

Release date: 18.01.2019

Améliorations

• 7959 – Customer list – Alphabetical Order – The customer list from “Client” tab is now as “default” in alphabetical order.
• 8087 – Murat SC 220/40 version compatibility – From now on, you have the possibility to export processing from Murat SC 220/40 CNC in a new format.
• 8112 – Run multiple instance of Ra Workshop – From now on, you have the possibility you run multiple instance of Ra Workshop at same PC, on different user, with different license
• 8117 – Processing CNC MURAT SC220/40- new option – We have added a new option called “Angle orientation”. From now on, you have the possibility to choose the angle orientation. The default value is “opposite”, this means that nothing is changed, and the new value is “same”. So, you can use multiple configuration of CNC MURAT SC220 – 40.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to mage sure the issues were resolved successfully.

• 7959 – Customer list – Alphabetical Order – The customer list from “Client” tab is now as “default” in alphabetical order.
• 8087 – Murat SC 220/40 version compatibility – From now on, you have the possibility to export processing from Murat SC 220/40 CNC in a new format.
• 8112 – Run multiple instance of Ra Workshop – From now on, you have the possibility you run multiple instance of Ra Workshop at same PC, on different user, with different license
• 8117 – Processing CNC MURAT SC220/40- new option – We have added a new option called “Angle orientation”. From now on, you have the possibility to choose the angle orientation. The default value is “opposite”, this means that nothing is changed, and the new value is “same”. So, you can use multiple configuration of CNC MURAT SC220 – 40.

Release date: 08.01.2019

New feature

• 8069 – CNC Welding export for Graf Synergy – From now on, as a Production you have ability to export a file using the Unified Communication Protocol for Welders and Corner Cleaners by Graf Synergy, so that you can use a Graf Synergy welder in automatic mode.
• 8067 – CNC Processing export for Graf Synergy (CLF) – From now on, as a Production you have ability to export a CLF Communication Protocol compliant file, so that you can use a Graf Synergy processing center in automatic mode.
• 8100 – CNC Processing export for Soukup Arcus – From now on, as a Production you have ability to export arc details in the xml file designed by Soukup so that I can use a Soukup Arcus in automatic mode.
  

Améliorations

• 7941 – Add filter in restore form – In restore form (Tools -> Management -> Restore) you can see now in extension look-up, the value “all files”.
• 8035 – Material export improvement – In the material export errors form you can now choose what errors to be automatically corrected.
• 8051 – Add insect screen material type in client quote – From now on, in reports, you will have information about insect screen (code). For this information you need to go to the Report Options, from application options, and change the value {0} to {0}-{1} from “Display insect screen code”.
• 8054 – CNC options – export – From now on, you can copy Operations from CNC Options Form in .txt or .xls file.
• 8064 – Profile form – paste tolerance – In the profile edit form, now exists a new option: Paste Profile Tolerance.
• 8071 – PBZ older version compatibility – Older versions of Thorversten PBZ centers use a slightly different format. We have added an option to the existing CNC, so now we’ll be able to export the data in the new format. The default options export the file in the existing format.
• 8090 – Import labor from xls – From now on, you have the possibility to import Labor data from xls.
• 8091 – Improve export tool – Technical parameters – In the export/import tool you have now possibility to export technical parameters. Until now, if you export a fittings system that had fittings accessory plan with technical parameter, the import failed.
• 8108 – Color Combination Code Filter in Color List – From now on, you can filter Color List based on Color Combination Code. You have a lookup besides Price Catalog Filter.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to mage sure the issues were resolved successfully.

• 8073 – Wrong round quantity – shipment loading report – In shipment loading report, the length of profile is round to a fix number. (e.g.: I have a profile that have 5.3 m, but in report is displayed 5 m.)
• 8075 – Mecal CNC option form – translation – In Mecal CNC Option form, the “Phase” column is not translated. This column has no caption, so it cannot be translated.
• 8102 – Changing color resets reinforcement setting – I have a project with a certain color, with an reinforcement (A). If I change the profile system color, the reinforcement resets to the default.
• 8109 – Copy a cell in cnc option form – When you copy a cell from CNC Option form, the Ra Workshop copied the entire row.
• 8111 – We have made some revision at translated words in fr-FR.

Release date: 08.11.2018

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

• 8074 – Invalid document format – I have a WLB with sliding components with insect screen on extension. After update, when I want to open this window library, I got an error “Invalid document format”.
• 8076 – Project management – Project browser control wrong translate in English – We have made some revisions in English.

Release date: 06.11.2018

Improvement

• 8046 – Default value of No. of tracks – Insect Screen – When I create a new profile with track – insect screen type, in tab extra in additional information, No. of Tracks comes with default value: 2. From now on, the default value of No. of Tracks will be 1.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

• 8042 – Custom properties – reported value issue – I have 2 properties sets, 1^st is for Sliding inactive and 2^nd is for sliding active. On sliding inactive I have a property called dummy handle, that have for value “yes”, 3 type of fittings color and for value “no”, fittings color has value “without”. When I select reported value “no”, for fittings color value “without”, in client quote the information about fittings color in not displayed, and wen I select reported value “yes”, in client quote is displayed for fittings color the value “Silver, without”.
• 8044 – Insect screen – tolerance does not apply – If I have a sliding project, with 1 wing and pocket left or right or 1 wing with mullion with hook, the tolerance that has been set between frame and insect screen sash does not apply on the profile next to the frame. This fact is happening on the normal sliding and vertical sliding.
• 8049 – Pocket type wrong value – When I have a monorail sliding window with 2 mullion configuration (left and right) the value of “pocket type” is null instead of none.
• 8057 – Object reference exception at Currencies edit – When I am going to Currencies from Tool Menu and I am trying to edit the symbol cell, when I focus at a symbol cell and I press right click, the Ra Workshop bring me an exception.
• 8059 – Restore database Czech language – We have made some updates at Czech language.
• 8066 – Incorrect weight in profile order – The RaWorkshop calculate wrong the weight from Profile Order and Shipment loading.

Release date: 17.10.2018

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

• 8033 – Wrong material reload – After opening an old vertical sliding project on a wood database, the component quotation is wrong. After refreshing (change width), the quotation is correct.
• 8036 – Wrongly copy color combinations – When I duplicate a color combination that is used at another color combination as Alternative color, the color combinations that contain first color as alternative color are also duplicate.
• 8040 – BOM do not regenerate at material type change – When I create a new quote project and change the material type at the project level after I created the components, the BOM does not regenerate, so I have other information and prices in BOM report towards the information displayed in property grid. If I force the material reloading, the BOM is correct.  
• 8041 – Use raw section types does not remain unchecked – The “use raw section types” check button does not remain unchecked. So that I cannot change the weight of material type if the “use material section types” is checked. 
• 8045 – Insect screen – opening type in client quote – When I have a project with casement window with insect screen, and opening type of insect screen is different of wing type, the information about open is displayed twice in client quote. We need the opening type of insect screen not to be displayed in reports.

Release date: 03.10.2018

Nouvelles fonctionnalités

• 8038 – Ra Workshop Czech (cs-CH) language – From now on, Ra Workshop is available in Czech (cs-CH) language.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

• 8026 – Wrong calculation statistics when I add extension – When you have a window with an extra cost item (e.g. extension) and go to Summary tab-> statistics, the field Glass Count, Frame Count and Lite Count are zeros.
• 8028 – Shutter roller – The opening symbol is changed at resizing – When resizing, the opening symbol changes from vertical to horizontal.
• 8032 – Exception at a custom property with yes/no value – I have a custom property with Boolean type. The I change the type to value list like follow: Yes, with reported value: No, and No with reported value: Yes. When I am drawing the component that contain this custom property, the program generates me an exception. From now on, you can’t make this change, and the program show you an attention message.  

Release date: 26.09.2018

Améliorations

• 8017 – Default view mode of material tab – From now on, the table from material tab of project, comes without 3 last columns, because is used in 1% of cases. So that we decided to hide them in default mode.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

• 8011 – Roller Shutter – Wrong drawing – When you have a Shutter roller Split, the Mullion profile is wrong drawing for inside view.
• 8012 – Property grid – Wrong Information – When you have a shutter roller box, in property grid appears an information (misc) which should not appear for users.
• 8011 – Section type translation – We have made some correction to the translation in English. 
• 8027 – Client quote – Joinery value is not displayed – When you have a project with extra costs and extra elements (insect screen, roller shutter etc.) the joinery value is no longer displayed. 

Release date: 17.09.2018

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

• 7995 – Effective dimension – pocket – The effective dimension for pocket from property grid disregard measurement unit that was set in application option.
• 7999 – Client Quote – Discount – In a project with discount applied, the final value before discount appear twice in Client Quote.
• 8002 – Composite profile – after import – After importing into the database a new profile system, the composite profile lost the component that already exist in the database before import and was added in the profile system imported.
• 8004 – Moving sliding can’t set at 3 tracks and 5 wings configuration – We can’t set a moving sliding with 3 tracks and 5 wings with the following configuration: X O (left) O (left) O (right) XThe third leaf can’t set to moving sliding.
• 8005 – Null value of wing type at insect screen – moving sliding – When I try to set a sliding window with 2 tracks and 4 wings configuration, and an insect screen without frame, the left wing of insect screen come without value. This fact affects the Bill of Material.
• 8008 – Cutting angle – frame cover profile type – The cutting angle for cover frame that was setting on profile system was applied on every profile, even if one profile has another cutting angle.
• 8016 – Carving wing type – rule don’t apply – The rules that was set for Shutter roller – inner status on carving wing type does not apply.  

Release date: 29.08.2018

New features

• 7889 – CNC Processing export for Mecal – From now on, as a production you can export the file for Mecal processing center, so that you can use a Mecal processing center in automatic mode.
• 7964 – Access rights review – From now on, as a fabricator with dealers and/or internal sales force you are now able to restrict access to configuration, window libraries and price lists, so that you can protect confidential information and avoid potential mistakes.
• 7965 – BOM Managerial Report – From now on, as a manager you can to list the BOM for several projects, so that you can make statistics and place material orders.

Améliorations

• 7930 – View mode option – CNC cutting option – We have added a new look-up for view mode in CNC option. The view mode can be “Viewed from inside”, “Viewed from outside”, “Opening mode view”.
• 7977 – Section code format options for reports – We have added a new option that allows user to see the section alias in reports. This is a Section Code Format in Application Options. Each report that displays the Section Code use this format with two parameters. {0} is the code and {1} is the alias.
• 7985 – Processing operation edit form, rules – Measurement Unit – In processing operation edit form and in processing rules we have used standard unit system: metric. If standard system was setting to Imperial, every measurement unit was imperial and in processing operation edit form and in rules was metric. Now we use the system that is set in application options. 

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

• 7931 – CNC option issue – We have a set of problem at CNC option. These options can be accessed from 2 places, and the option form was different between the two places.  
• 7937 – Generate message – Out of interval– The program does not generate message “Out of interval” for ranges that was set for “frame” and “vertical sliding” wing type.
• 7952 – Section type translation – Spain – We made some translation in Spain; a few words were not translated correct. 
• 7953 – Add new profile – cover wings – When a new profile type “frame – window/door” was added, this profile type comes with the value of cover wings “Unknown”, although should be come with the value ‘Outside’. This value can’t be modified before saving the profile. After saving, the look-up gets active.
• 7960 – Production Project is used by other user – When you create a new project and save it on the database with the “save as” option then logout and login with another user, you could not open the project because the project remaining blocked by first user.
• 7963 – Insect screen vertical sliding window – When an insect screen without frame was added, the program brings an insect screen with another profile type (Sash Single Glass) although it was supposed to bring insect screen with “Insect Screen Sash” profile type. The Wing type comes with initial value “empty”.
• The wing type was “Fixed Sliding” and “Moved Sliding”, so I can’t add casement insect screen.
• On the drawing I don’t see any symbol for opening type on the insect screen.
• 7973 – Tolerance – Slide and Swing – When you had one Slide and Swing type with sliding right opening, and a tolerance was set between left sash and left frame, the tolerance doesn’t apply.
• 7984 – Unreadable – Price Column – When you have a used price from an old catalog, the text price color is blue. The background is blue, and the price becomes hard to read. From now on, when you have a price written with blue color, the background become white, and the price is readable.
• 7987 – Measurement unit – Processing Rules – If we had a rule for a processing that was set to a distance (not function), the distance was always in mm, irrespective of the measurement unit used. Same behavior was find in processing operations edit form.
• 7993 – Sliding window – pocket – In a sliding window with 2 tracks and 4 wings with pocket, the wing beside pocket was sliding inactive. Now is sliding middle.
• 7994 – Wrong width on sliding wings – Sometimes, after we change the number of wings (if an adapter on the original leaf is changed to an adaptor) the width of the wings is wrong. After one more update the size is adjusted.
• 8000 – Insect screen tolerance – When a special tolerance between a mullion with track and sash insect screen was setting, the tolerance does not apply.

Release date: 04.06.2018

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

• 7935 – Display Order is not functioning on XML file Soukup Wizard 4L CNC – The display order of the materials properties is not working on XML file. This affecting the sorting of profiles in CNC export file.  
• 7938 – Processing screws for reinforcement on custom profiles–The screwing holes processes for reinforcement performed on one of the components of a compound profile was not working properly. Rules having the parameter “with reinforcement” are not executed anymore in new version. If the rules contain the parameter “without reinforcement”, the processes are executed correctly.
• 7939 – Processing screws for reinforcement on custom profiles – When exporting the file for Thorwesten PBZ CNC, the program triggered an exception. If the interface language was set to Romanian (RO) everything was fine.
• 7942 – French language changes – We made some changes, re-translating opening types and profile types in French.

Release date: 22.05.2018

New features

• 7913 – CNC welding export for AKS 6400 – From now on, as a production you can export the file for Urban AKS 6400 welding machine, so that you can use an Urban AKS 6400 welding machine in automatic mode.
• 7914 – CNC cutting export for DGU 600 – From now on, as a production you can export the file for Urban DGU 600 saw, so that you can use an Urban DGU 600 saw in automatic mode.

Améliorations

• 7892 – New option when change profile – cutting optimization – There is an option that, when the profile is changed, the order number of container is changed.
• 7894 – Change display order in properties set – From now on, in properties set you will find the “wing type” above “custom properties”.
• 7895 – New option: Format date and time – There is an option that, if you add letter “f” after “d” in “date format” editor from “reports option”, in the report footer you will find date and time.
• 7896 – Delivery date on report – From now on, as an offer or production, when you create a new project, the default delivery date comes with value “empty”, so that this information will not appear in reports if it has no value.
• 7922 – SectionType translation – We have solved some issues with the translation.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

• 7925 – Default value for custom type handle list is not working on sliding windows/doors – If a Custom Property of Handle List type is used on sliding leaf, Values with Position Type = “Custom” do not work. The Handle is centered instead of using the position defined in the database but the user can edit the position.
• 7933 – Processing operation on component profile do not work correctly – If we have a profile with more than one component and we set a processing operation for one of its components. The respective operation will be processed on every component.
• 7926 – Exclude opening type in reports for sliding windows – If we have a sliding window project, in the reports, under the picture, we have the information of opening type (“inwards” or “outward”). This information was incorrect for sliding, so we are decided to remove this information for this projects type.

Release date: 8.05.2018

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully 

• 7921 – Problem copy range – When I wanted to copy a range from an old system to a new one, it couldn’t be copied if the created system is not saved before. This issue makes the program to generate an exception.
• 7919 – Name change of “MultipleSlideVertical” – The wing type “MultipleSlideVertical” in the program is written without space between words. This issue affects the sorting and is hard to find.
• 7917 – Inactive forms – “Materials” – The editor “No. of Tracks” from tab “extra” in the editing materials window is inactive for “Head Jamb” and “Sill -vertical sliding” profile types.
• 7911 – Ultimate Windows – Pocket problem sliding wing – If an old “Single Slider” Project from database is loading, the project comes with a pocket, although the pocket state is “null”.
• 7910 – Ultimate Windows – Insect screen problem – If an old sliding project is loading, the insect screen does not load properly, is placed over the entire length of the frame, not on the wing.
• 7900 – Warning message: Vertical Sliding – The warning message “The construction mode of vertical sliding window was modified substantially. We recommend remaking the component.” It appears in English just when the language of application is setting in English. When the application language is other than English this message appears in RO.

Release date: 18.04.2018

New features

• 7839 – Construction mode of vertical sliding – Construction mode of vertical sliding was changed substantially, and we recommend you to remake the project with this type of windows.
• 7867 – Cut at 45 degree if we have different H2 – As a Production or Offer you can now to cut profiles at 45 degree wen the H2 is different so that you can get the right production reports.
• 7847 – CNC Emeggi TCut – We have integrated a new type of CNC – CNC Emmegi TCut

Améliorations

• We have made a revision of sliding wing
• 7835 – Glass order report – Now you have facility to draw glass with ornamental grill, and the  glass order report, the glass with ornamental grill is listed separately toward other normal glass.
• 7856 –  Now you have possibility to add a technical parameters in the database without measurement unit
• 7852 – Different setting use for use fraction in design and production – Now you have possibility to set different use fraction value in design and production

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully 

•  7874 – Problem loading adapter from old projects Abyat_Kuwait – When an old project was loading from databases, the adapter does not loading. Use adapter check box is ticked “Yes”. This problem leads to changing W of wings.
• 7881 – SectionType translation – We had some problems with the translation of some word
• 7884 – Cutting angle problem – There was a change in the program with regard to the cutting of the profiles witch has led to the deterioration of some projects.
• 7846 – Show simple quotation twice in Dealer Quote Report Option – On Dealer Quote report on Report Option windows we had the same information twice on ro-RO.
• 7858 – Consumption regeneration after price update not working – After profiles price modification, old projects, reopened with the new database loaded, still have the overall price unchanged. Even after using “Regenerate consumption” in the BOM tab, price doesn’t change. The only way to obtain the price modification is to modify, for each component, a dimension and then undo modification and even so, still is not the right price.

Release date: 05.02.2018

New features

• 7795 – Default extra width for slidings –  As a Sales, Production, now you cand design slidings with unequal wings as default, so that you work less and make less mistake.
• 7799 – Sliding leafs meeting without adapter profile – As a Sales, Production, now you can using sash profiles that includes adapter, so that you don’t need to add dummy profiles if the system does not use adapter.

Améliorations

• 7818 – Sash weight – From now on, the Sash Weight is displayed in the Properties Window. When the Bill of Materials is not computed, we can’t display NA. Without this feature you could not see what rule has been applied.
• 7820 – Add Name for CNC shortcuts – On the main tool bar, we have 5 shortcuts for CNC, and 4 of them did not diplay the icon name when you were with the mouse over it.
• 7827- Cyrillic Transliteration for Artikon and Kaban CNC – Cyrillic input was converted to Latin: “Иван Петров” -> “Ivan Petrov”. This is not only for project and client name, but also for profile, color, glass names etc.
• 7828- Add HardwareInfo and GlassInfo as label parameters – From now on, in the label you have the name of the hardware (Maco, Roto etc.) and the name of the glass or at least the tockness (24 mm, 20 mm etc.)
• 7808 – Bring Display Order on Column Chooser – From now on, you can change the Display Order from Column Chooser on the Profile window when you needed.

We have solved a set of bugs that have been reported by clients or our personal 

• 7822 – Roller insect screen – Mesh not appearing in Bill of Material – We had an issue, the client “Buildersmart” had 3 profile systems (roller insect screen) that slide left and right and he adjusts the insect screen before inserting it into the housing.
• 7830 – Rabel – Adapter tolerance is not working properly – By default the system now takes up the default tollerance for the adapter profile
• 7813 – Unit Editor in Form Section – From now on, all the columns in Form Section use the correct editor
• 7760 – Roller Insect Screen – Opening direction symbol not changing – When you create any roller insect screen with the system ZIP80, trying to change the opening direction, the arrow symbol remained the same. Now we fixed this problem
• 7788  – UseReinforcement has wrong translation – The translation for property “Use Reinforcement” from property grid is now “Reinforcement” -> yes/no. The translation should be “Use Reinforcement”.
• 7790 – Rule Filter Delete – Apply a filter on accessory rules based on an accessory code, close the form and delete the accessory, after returning to the rules form, you will get an exception and the form will not load properly.

Release date: 07.12.2017

New features

• 7755 – Overlaped tolerances for mullions – As a Wood production, now you can obtain the cutting length of a mullion regardless what profiles is join with, so that you don’t have to define a lot of identical profiles with different processing tolerances
• 7771 – Processing CNC for Soukup Crafter/Wizard – As a Wood production with Soukup CNC, now you can export data for Crafter / Wizard, so that you don’t have to define and use dummy profiles just for CNC export reasons.

Améliorations

• 7714 – Report date – From now on, the Report Date will be printed on each report, on the report footer.
• 7767 – Client qoute – services options update – Client to benefit: Easy Windows, NK Windows, Warm Windows. We have updated the client quote for services for the following report options:
  1. No details works anymore like the details Detailed per Project
  2. Extra Detailed element without value on project are now in the total summary and are calculated in the final value
• 7781 – Reports Localication on IT – We have had some translation requests from Thermo Design regarding Client Quote and Dealer Quote. We have resolved this issue.
• 7751- Services on client quote report – From now on, The Services section have a title and also have a space between Services section and Total section

We have solved a set of bugs that have been reported by clients or our personal 

• 7709 – Export-Import set Main Price Catalog – We have a problem when exporting a databases with Price Catalog 2 in a destination database with Price Catalog 1(not Main) as Main Export .rad file with Data Set Setiings Two Language. After importing the price was totally wrong
• 7759 – Ra Server – Lock Database option not appearing – Lock database option did not appear in Tools – Management after resetting the interface. In Ra client was no option for Lock database.
• 7762 – Check box Use Material on Profile 1 selection – On Form profile 1 selection from Rules the Check box Use Material has from now the correct position
• 7768 – Add service to project default currency – From now on, when adding a service to project manually will come with default currency.
• 7776 – Unable to create a new Profile System – We had a problem when you create a new profile system starting from zero using Add tool, and you add minimal details as Code, Designation, Manufactured and Currency, when you select OK, you had the following message: “Unable to cast object of type”
• 7777 – Design – Change Profile System with different colors – When you move an element from a profile system to another and you have different color list you have an error Invalid Value and the system didn’t change

Release date: 03.11.2017

New features

• 7735 – Resize Registration window Branch on Default view  –In the Registration window you can see now the Branch information, not just Supplier Information
• 7739 – The column Covered System has been moved – The default position of the column Covered System has been moved at the end on form: Profile System
• 7667 – Hide project in View – Now, when you create a production project with components from quote projects, a new option has been introduced that excludes quotes that have all the components already included in other production projects.

Améliorations

• 7703 – “Extra width” for wing to be made available in Sliding –Now we have added “Extra width” option (like the one in Folding) to be available in slididing. The user calculates the sliding rails according to a formula that is impossible to apply in the software, thus the Extra width option for the wings is necessary, as the user will work only with the configurations that are premade in the windows library.
• 7668 – Thorwesren profile position – For every profile that do not have top, left, bottom or right position you can now export the orientation and the profile can be processed now
• 7740 – Execution plan– In execution plan report, when there is no information about the profiles, hardware, glass, the header line under the component image does not appear now.

We have solved a set of bugs that have been reported by clients or our personal 

• 7742 – Deleting Parent Accessory – Delete a custom accessory that is used in the rules and then save, a message will appear saying there was an error saving records to the database
• 7732 – Tolerance applied in Design Mode – Tolerance applied in Design Mode does not overwrite the tolerance set on Profile or Profile System.

Release date: 26.09.2017

New features

• 7615 – A new option was added – users with admin rights can Lock and Unlock databases; in the locked mode, the materials database will open in read-only view, so no changes can be performed.
• 7649 – For dealers and producers a new option – “Include glass value,” was introduced in the Dealer Quote report; now, users can add glass to the Dealer Quote to sell components with glass.
• 7650 – Starting with this version, a new field was added – “Minimum Radius”; the feature prevents the user from designing arches that cannot be manufactured.
• 7652 – A new option was introduced for report options; users can now save the options to the database through the “Set as Default” button and upload them later for other projects.
• 7662 – A new option was introduced which prevents users that don’t have admin rights from activating inactive materials. Also, users without admin rights can see only the active components in the database.
• 7663 – A new button was introduced in the materials toolbars – “Only Active”. When activating it, users will see only the active components; after deactivating it, users will see all the components (active and inactive).

Améliorations

• 7648 – Updates were made to Client Quote, Dealer Quote, Window Panel and Execution Plan report options; the Show Materials option was transformed into Show series information, Show fittings information and Show glass information; the Show Materials Details was transformed into Show profile information.
• 7661 – A new update was added – if the user designs a component that is out of the hardware range, the last valid interval will be used when calculating the hardware. This will generate a valid bill of materials even for special sized components. The user must check the BOM manually and add the extra items if necessary.
• 7664 – An improvement was made – when a user deactivates a component from a compound item, the main item (which the compound is part of) will also be deactivated. The option applies to profiles, accessories, as well as processing operations.

Release date: 15.12.2016

Améliorations

• 7365 – In Order Confirmation report the horizontal mullion inside of a door sash was quoted in the same way as in the production report. The new behavior shows the mullion exactly like in the quote so the customer can understand it easily.
• 7364 – Writing a multiline description/remark on a component was not showed correctly on the quote. The new behavior take into consideration the new line character.

Bugs fixed

• 7277 – An exception was raised when trying to open the stock form (Text: Object reference not set to an instance of an object.).
• 7372 – An exception was raised when saving a window library to the database (Text: Column ‘Id’ is read only. Description: System.Data.ReadOnlyException: Column ‘Id’ is read only.)
• 7371 – When selecting a segment, the property grid was showing an obfuscated property under the Misc category
• 7370 – The Cutting Optimization report (graphic version) was showing a negative segment number.
• 7369 – After optimization, the Profile Label report was not showing the project code anymore.

Release date: 09.12.2016

Bugs fixed

• 7315 – An exception was raised when opening a project file and trying to save it to the database as a Window Library (Text: Column ‘Id’ is constrained to be unique. Value ‘133839’ is already present.)
• 7358 – The design on the Profile Systems form in Portuguese language was deteriorated.
• 7363 – The design on the Glass form in Portuguese language was deteriorated.
• 7368 – Some localization corrections were made to the French version of the Option form, Database tab.

Release date: 05.12.2016

New features

• 7366 – The Profile Cutting Labels report is now able to display a bar code that can be used for production automation. This code, for example, can be read by the CNC machining centers that are linked with Ra Workshop in automated processes. This report is an alternative for cutting centers that do not have a printer attached.

Release date: 17.11.2016

Améliorations

• 7346 – Urban AKS 1600 CNC export has a new option.
• 7345 – All CNC exports have a new option. Now you can choose to export the code, even if an alias was previously defined.

Bugs fixed

• 7336 – An exception was raised when trying to open the glass selection form (Text: Object reference not set to an instance of an object.).

Release date: 11.11.2016

Bugs fixed

• 7330 – When trying to export glass items to Excel you get the following message: “Export failed. Please check if there is enough space on your drive.” This message was incorrect based on the real facts.
• 7331 – In glass form, Thickness property was spelled wrong.

Release date: 09.11.2016

Améliorations

• 7328 – An improvement was made to the Graf Synergy cutting center CNC export. Starting from now we are able to export V cut information. You can export it as a V cut or as a 45 degrees angle (mainly for profiles that are not symmetrical).

Release date: 07.11.2016

Bugs fixed

• 7317 – An exception was raised when trying to generate the quote report with Show technical parameters activated.
• 7316 – When generating the quote report with Show compact custom properties activated, on a component without custom properties the design was showing a blank table.
• 7325 – An exception was raised when trying to save a project after you deleted a percentage from the Extra Costs tab. (Text: Conversão especificada não é válida.).
• 7326 – The English version of the application was showing an incorrect message when trying to change the price of a list of colors.
• 7327 – The Authentication lookup was not localized (English).
• 7321 – Duplicated rule templates have been discovered in different databases. This could result in data transfer errors between different databases. We created a script that will fix this problem.

Release date: 28.10.2016

New features

• 7267 – A new type of window/door is available: Slide and swing. This type of window/door has a hinged leaf on one side (or both sides), the rest of the leaf are sliding and at the end of the track they can swing, so it can open completely like a folding.

Améliorations

• 7264 – Project code generation was improved and now is available also for projects saved as files. Prior to this autonumbering was available only for projects saved into the database.

Bugs fixed

• 7301 – Opening a project from the database will result in a Time Out exception, due to a compiled stored procedure.
• 7282 – An exception was raised when trying to open a project (Text: The surface of parts is greater than the real surface).

Release date: 17.10.2016

Améliorations

• 7271 – The column Material in Project / Summary / Materials was repositioned for a friendly use.
• 7269 – Cutting CNC save dialog and machining CNC save dialog did not take into account the saved path. These dialogs were opening in the last used path, instead of the path saved as a default.
• 7278 – The Cutting Optimization report now includes numbering to keep track with the labels. The same number is available on the label and on the cutting bar.

Bugs fixed

• 7298 – The Color Combination lookup in Glass Edit form had the same column twice.
• 7297 – When joining two structures, one with custom properties and one without, the Execution Plan report was showing the same properties for both structures. The correct behavior is to show the custom properties only were available.
• 7296 – An exception was raised when trying to open a project in Read-Only mode and running the Quote report while Show technical parameters was on. (Text: Object reference not set to an instance of an object.)
• 7295 – Exporting hardware systems that contains glass rules, without exporting the glass category also will make the import fail with this message: The INSERT statement conflicted with the FOREIGN KEY constraint “FkRuleIdGlass”.
• 7290 – Kaban Cut export will include alias were available, instead of Profile Code.
• 7290 – The message: “The project is not optimized. Do you want to optimize it now?” appears also on optimized projects when opening on a different station, on the same database. The system now detects that the project is optimized and will not display the message anymore.

Release date: 07.10.2016

Bugs fixed

• 7276 – In the list of parameters in the Cutting Labels report, Code is shown 2 times. None of these two fields is working. The parameter is not replaced with the code at runtime.
• 7275 – An exception was raised when trying to generate the quote report with Show technical parameters activated, on a profile system without a Fitting plan (Text: Object reference not set to an instance of an object)
• 7272 – In some scenarios the hinge was drawn in a wrong position outside the sash profile.
• 7270 – When making two data exports with different options, the system disregards the second set of options resulting in an identical data file.
• 7289 – An exception was raised when generating the quote report on a project with the delivery date set to null.
• 7288 – On some occasions data export would fail with the message: “Error on exporting data!”.
• 7287 – The options Show Pyramid logo was not persistent. After restarting the application, the property would revert to the default value.
• 7286 – An exception was raised when trying to generate the Order Confirmation report (Text: Object reference not set to an instance of an object.)
• 7283 – When adding 10 frames inside a component, frame number ten (F10) was between frame one (F1) and frame two (F2). A new sorting type was implemented.

Release date: 30.09.2016

Améliorations

• 7261 – Custom development: The Abyat export form displays the number of records.
• 7260 – Dimension format parameter was added as an option. Now you can choose the way you want to format the dimension between L x H or H x L. Previously this parameter was present only in the configuration file.

Bugs fixed

• 7279 – Starting with version 3.6.0.8 there was a calculation error in French windows/doors. The two leaves were overlapping.

Release date: 28.09.2016

New features

• 7037 – You can copy a rule template from an existing rule and apply it to a set of other rules. Finding the right rule template for every rule you wanted to change was considered time consuming.
• 7195 – CNC integration with Teleios machines in automatic mode (Teleios, Soenen Hendrik Dem Modular, Soenen Hendrik DVE, Soenen Hendrik Q4).
• 6888 – The report title can be customized as a RTF document with merged fields. This will allow users to display any information in the header, with the exact format they need. In this way, the user will be able to design a header with client info displayed in an area visible when the offer is folded and enveloped.

Bugs fixed

• 7249 – Glass filtering did not work as expected when using a profile system with a glass filter defined. The default glass was overwriting the glass filter property on the profile system.

Release date: 22.09.2016

Améliorations

• 7048 – Dealer information fields were added to the DoP report. Up to now only the dealer name was available.
• 7039 – The trademark “Powered by Ra Workshop” has become an option. By default, the application will continue to display it.
• 7012 – A new tolerance is available to control the distance between the adaptor (false mullion) and the sash.
• 7017 – Technical parameters are now displayed with full name and symbol (Ex: Frame thermal transmittance (Uf)).
• 7257 – The Order confirmation report was revised. Several improvements have been done.
• 7254 – A new tolerance is available to control the distance between a sash with hook and a sash profile. Previously you could control only the distance between the hook and the sash profiles.

Bugs fixed

• 7259 – A new user could not add windows/doors to existing libraries. However, he was able to create new libraries and operate it normally. Access to the old libraries was forbidden.
• 7259 – An exception was raised on some occasion when trying to load a project (Text: Object reference not set to an instance of an object. at Pyramid.Ra. WindowLibrary. TemplateEdge.811009876(AlignmentType , KnownSide , Boolean) .
• 7230 – The Profile System parameter in the rules was showing extra information that was not useful relatively to the use of the application.
• 7248 – Resizing option of Labor Categories form have been revised.

Release date: 16.09.2016

New features

• 7243 – A new feature was added to facilitate finding the appropriate glass item in databases with a large number of items. Selecting the glass is now possible by using a filter form that enables you to find it easily, search by any parameter of the glass.

Bugs fixed

• 7047 – Data import failed when a rule template had a different GUID in the source database, then the destination database.
• 7046 – In some situations, the changes made in the BOM were lost after reloading the project.

Release date: 13.09.2016

New features

• 7117 – A new set of features have been implemented to prevent users to access projects created by other users. If you work in a dealer system, a dealer won’t be able to see projects created by other dealers.
• 7116 – Asymmetrical hardware operations can now be processed by correctly. We are now able to define operation offsets relative to the loading direction (Ex: asymmetrical mullion connector – Aluplast).
• 6854 – Alternative color. Ra Workshop is now able search for an alternative color, whenever the main color could not be found for a certain item. (Ex: when designing Golden Oak windows the system is able to locate automatically the Brawn Aluminum insect screen).
• 7151 – New database security policy has been enforced. The Material and Config database can now be linked and one will not load without the other.
• 7152 – A new rule system has been implemented in order to calculate technical parameters. This system will allow the user to accurately compute the technical parameters.
• 7113 – Panels can be defined with different color on each side. This will translate in a more accurate drawing and will eliminate some production mistakes.
• 7191 – Custom development: the SAP export can now be influenced by the installation stage. Different type of materials can be exported with different phases.
• 7178 – New rules and parameters have been added to the CNC machining system in order to make the number of rules as small as possible and easy to maintain.
• 7031 – CNC Friendly Export. This new feature allows the user to export the CNC machining operations in a friendly TXT format, very easy to read and understand. This make a huge difference in CNC implementation projects.
• 7038 – A new feature has been implemented that will allow the user to export CNC data without machining operations. This is very useful when you have a machining center that does also the cutting and you intend just to cut some profiles.
• 7034 – A new CNC toolbar is available. This should make the application more user friendly when working with automated machines.
• 7043 – A new option is available for the Quote report. By activating this option, the quote will display drawings in a very simple way: just height and width. No other quotations will be showed.
• 6977 – Fixed and variable gear can now display the handle position on the drawing. The user can select different dimensions and this information will be present in all the production reports.
• 6824 – A new error and warning message system has been implemented. Now, you can fully customize the warning and error messages users get when they design windows / doors.

Améliorations

• 7142 – For some colors (ex: Ash Black) it was difficult to see the sash / mullion / frame lines. This made the production reports difficult to read. The new behavior computes the drawing color and the selection color based on the window/door color.
• 7119 – Custom development: SAP export is now using alias, instead of the original Ra Workshop code.
• 7215 – The designing of the sliding windows / doors has been revised. Number of tracks parameter allows you to select any number between 1 and the total number of rails the frame has. In this way, some design errors have been eliminated.
• 6998 – The Profile Cutting Labels report was modified and the order of the labels was changed when optimizing with double cutting.
• 7177 – The Project Management dialog and Open Project shows the number of records (the number of projects).
• 7108 – A new option is available in the Quote report. When activated this option will remove the surface information from the quote.
• 7123 – The CNC Options dialog shows the number of records.
• 7033 – An operation that was used as an item in a compound operation could not be used anymore. The new behavior allows you to use one operation as item in as many compound operations as you want.
• 7094 – A new form is available: CNC Options. Prior to this, the user was forced to create a project in order to change something in the CNC configuration.

Localization

• 7217 – Due to a localization or anchoring problem, the Spanish users could not change the path of the CNC export file.
• 7193 – “View from outside” text was spelled wrong.
• 7050 – Some parameters in the TRF custom reports had different names then the ones they have in the application.
• 7150 – In the Spanish localization the Profile System form had an improper layout.
• 7149 – In the Spanish localization the Material Type information was not translated.
• 7183 – In the English localization some texts were not translated.

Bugs fixed

• 7188 – An exception was raised when resizing a door, in some scenarios (Text: System.ArgumentException: percent at Pyramid.Ra.Geometry.Workspace.Objects.Edge.GetPercentPoint(Double percent)).
• 7224 – Cutting optimization was lost after reloading a project with at least one irregular shape window.
• 7241 – Database data import fails an alias conflict. (Log: “Column “ConsumeItemType, IdMaterialBase, IdMaterialExtra” is constrained to be unique.).
• 7240 – When the size of the window/door exceeds the maximum height and weight defined on the ornamental grill a warning message is triggered.
• 7239 – In some scenarios the ornamental grills were lost after material reloading.
• 7238 – The image of the windows / doors in the Window Library did not reflect the ornamental grill or the grill drawing.
• 7237 – Newly created window library projects did not appear in the Window Library tool window.
• 7236 – Double clicking on a custom message was triggering the selection of the root element instead of the element that was actually triggering the message.
• 7235 – Once you added a Custom Message Schema to a Fitting Plan, could not be deleted anymore. A delete button was added.
• 7234 – In custom message rules the user could not use the functions that depend on the leaf size or the ones that refer to a specific range.
• 7233 – Warning / error messages remained active even after Is Active property was set to False.
• 7232 – Glass parameter form was not showing in Custom message rules.
• 7227 – CNC cutting export was showing some differences (angles). All CNC cutting exports have need rechecked.
• 7226 – An exception was raised when exporting for Elumatec SBZ 610 (Text: Unable to cast object of type ‘Pyramid.Ra.CNC.CNCOptions_SBZ610’ to type ‘Pyramid.Ra.CNC.CNCOptionsCutting’.)
• 7216 – Paulistinia window is a type of sliding window that uses a tree rail frame and it is made out of a normal sliding window (first two rails) and a louver sash on the last rails. The problem was that the louver sash was always synchronized with the sliding sash and because of this the user cannot configure it as a pocket sliding sash.
• 7214 – When designing a monorail sliding window with a fixed insect screen the bill of material was not generated. Also, the tolerance between the mullion with hook and the sash was not working properly.
• 7213 – The Custom Message form was not properly designed and docked.
• 7212 – An exception was raised when trying to copy/paste a custom message (Text: Input string was not in a correct format.)
• 7208 – The Custom Message Categories form did not resize properly.
• 7207 – When trying to use a cover profile without the priority property defined an error was raised (Text: Invalid value!).
• 7206 – The Cover Profile tab in the Profile Edit form was showing all the profiles, instead of allowing the user to select among the cover profiles only.
• 7174 – When changing a profile, the system did not select the default reinforcement.
• 7026 – The system was allowing the user to create a compound processing operation having as components other compound operations. This has been restricted.
• 7025 – Copy / pasting a compound operation would result in having the copied items in the original compound operation as well.
• 7022 – Copy / pasting a compound operation would result in duplicating the compound items as well.